[Marin Stoyanov]

I just start V.5 this week, it is opening 3 trades now.

[Marin Stoyanov]

for the version 4.3, it is strange that now the open trades have no SL. It was normal last week.

[Marin Stoyanov]

Hello Nicholas, you can go to Account > Order and click on the order number to see the information from the confirmation email and get access to the robot.

Kind regards,

Marin

[Marin Stoyanov]

Dear Petko,

In one of your account you use Forexpropfirm and its leverage is 1:30. In your opinion for the one shoot/entry not martingle, is it always enough?

[Marin Stoyanov]

In my opinion both of your strategies is dangerous. The scale up one is dangerous if you don’t monitor it all the time if consecutive loss happened, it will violate 5% daily limit. The three top performers EA will be dangerous too, your DD is close to 5%, and it’s just lucky not violate it.

[Marin Stoyanov]

Hello traders,

Petko has updated the Top 10 EAs.

All users who purchased the EAs received a link to download the new robots.

We received a few requests from users who wanted to test the prevoius EAs so starting this month we will leave the robots from the past few months in the folder as well. This way you be able test more robots. Just remember that the latest version is the most suitable to use with the current market conditions.

We would appreciate if you share any feedback or results from your trading with the EAs in the forum. This might help Petko in improving the EAs every month.

Best regards,

Marin from Customer Support team

[Marin Stoyanov]

Well after moving to MT4 it all seems to working fine !

 

Just had an SL moved to BE. :)

[Marin Stoyanov]

no it was on a regular 25k mt5 demo account.

i have given up on it and opened a 25k mt4 demo account, Lets see if it works now.

[Marin Stoyanov]

Iclosed all open trades, removed all the charts, then restarted mt5 terminal.

 

i then added the 7 charts and an ea to each chart/ Still i get errors.

a snippet of my experts logfile : i am getting position not found and invalid lotsize errors now.

 

MN 0 14:49:50.903 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Position doesn’t exist
JL 0 14:49:51.011 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Position doesn’t exist
RK 0 14:49:51.112 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Position doesn’t exist
OK 0 14:49:51.218 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) SetBreakEvenStop(300) set StopLoss to 1.68087, Bid=1.6838899999999999
NI 0 14:49:52.346 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Position doesn’t exist
LG 0 14:49:52.454 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Position doesn’t exist
JE 0 14:49:52.562 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Position doesn’t exist
LP 0 14:49:52.670 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Position doesn’t exist
DL 0 14:49:52.777 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) SetBreakEvenStop(300) set StopLoss to 1.68087, Bid=1.6838899999999999
OQ 0 14:49:54.068 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Position doesn’t exist
IL 0 14:49:54.169 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Position doesn’t exist
HJ 0 14:49:54.276 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Position doesn’t exist
RI 0 14:49:54.377 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Position doesn’t exist
HF 0 14:49:54.486 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) SetBreakEvenStop(300) set StopLoss to 1.68087, Bid=1.68391
PD 0 14:49:55.013 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Position doesn’t exist
JR 0 14:49:55.121 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Position doesn’t exist
DP 0 14:49:55.222 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Position doesn’t exist
CO 0 14:49:55.328 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Position doesn’t exist
EO 0 14:49:55.436 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) SetBreakEvenStop(300) set StopLoss to 1.68087, Bid=1.6839
RJ 0 14:49:55.578 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Position doesn’t exist
NH 0 14:49:55.686 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Position doesn’t exist
GG 0 14:49:55.793 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Position doesn’t exist
EE 0 14:49:55.894 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Position doesn’t exist
NR 0 14:49:56.001 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) SetBreakEvenStop(300) set StopLoss to 1.68087, Bid=1.6839
GQ 0 15:11:49.674 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Invalid volume
IM 0 15:11:49.782 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Invalid volume
GJ 0 15:11:49.890 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Invalid volume
JF 0 15:11:49.998 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Invalid volume
LS 0 15:11:50.181 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Invalid volume
FP 0 15:11:50.282 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Invalid volume
RL 0 15:11:50.390 GBPCAD M1 FTMO Filter M30 (7) (GBPCAD+,M1) Error with OrderCheck: Invalid volume

 

as i said earlier….this is a 25k demo account on vantage markets.

what do you suggest i do ?

[Marin Stoyanov]

Alan,

Yes i can see your SL is at BE now.

So really its just a case of me restarting MT5 and loading the EAs again on the 7 pairs….this hopefully will stop the problem setting the new SL once the trade reaches “breakeven” points in profit.

 

Thanks for your time.

[Marin Stoyanov]

Alan,

 

 it will set a new SL at breakeven but the original SL does not change

…so is this an internal SL at breakeven… surely an order can only have one SL.

 

After this week i will restart MT5 and reload the 7 EAs.  I’m running them on a demo account, see if that fixes the “Position not found” error.

[Marin Stoyanov]

Here’s the code …. its trying to set the SL not open a “breakeven” order…

if(position.PosType==OP_BUY)
{
breakprice=position.OpenPrice+_Point*commission/position.Lots;
if(tick.bid-breakprice>=_Point*breakeven)
{
if(position.StopLossPrice<breakprice)
{
if(WriteLogFile)
logger.WriteLogRequest(“SetBreakEvenStop”,
“BreakPrice=”+DoubleToString(breakprice,_Digits));

ModifyPosition(breakprice,position.TakeProfitPrice);

Print(“SetBreakEvenStop(“,breakEven,”) set StopLoss to “,
DoubleToString(breakprice,_Digits),”, Bid=”,tick.bid);
}
}
}

[Marin Stoyanov]

forgot to add…..what is a breakeven order ?

[Marin Stoyanov]

Alan, thanks for your replies but …

Thats not what the EA is trying to do it seems to me…its trying to move the SL to breakeven….that’s the error message in the logfile…

2023.10.31 16:17:57.078 EURAUD M1 FTMO Filter M30 (3) (EURAUD+,M1) SetBreakEvenStop(300) set StopLoss to 1.67314, Ask=1.66998

the important part being in bold italics. 

That doesn’t answer the fundamental question … why are we getting error messages? Whatever it is that the EA is trying to do is NOT WORKING.

Is there a document where the EA settings are fully explained, especially this BREAKEVEN setting ? Or perhaps whoever setup the strategy for the Ea builder needs to come on the forum and give a definitive answer !

[Marin Stoyanov]

Hello all, yes I’m having the same problem seems like there is an issue with the EA So currently I’m also setting SL to breakeven manually.

 

This is happening on MT5 not sure if it also occurs on MT4, but this issue needs to be fixed ASAP

[Author]

Posts