Forum Replies Created

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • October 11, 2023 at 23:20 in reply to: FTMO Robot: V4.3: What’s new? #204217
    User AvatarJanek
    Participant

    It would  be amazing! and live tracker  …

    September 17, 2023 at 16:06 in reply to: FTMO Robot: V4.3: What’s new? #199275
    User AvatarJanek
    Participant

    Seems like really amazing improvement! Great job Petko!
    Which 2 pairs are currently the best now for version 4.2?

    Thanks,
    Janek

    September 5, 2023 at 21:55 in reply to: Top 10 EAs: Properties & Settings #196220
    User AvatarJanek
    Participant

    Hi,

    Do you use a fix spread protection for all pairs the same e.g. 30 points?
    Or individually for every pair? If individually how to calculate it?

    Thanks,
    Janek

     

    September 5, 2023 at 20:46 in reply to: Updates on the Top 10 EAs #196201
    User AvatarJanek
    Participant

    Hi Petko,

    Thank you  for the updates!
    Should I remove the old bots or keep them working parallel to the new one? I am asking as I have just been testing the old one for two weeks.

    Thanks,
    Janek

    September 3, 2023 at 15:39 in reply to: Prop Firm Robots: Errors and Solutions #195749
    User AvatarJanek
    Participant

    So myfxbook and separate account for this 7 pairs would be the best way to track the performance?

    September 3, 2023 at 14:06 in reply to: Prop Firm Robots: Errors and Solutions #195680
    User AvatarJanek
    Participant

    Hi,

    I don’t know why I am  not getting Magic number. I needed to add custom order comment. Is there any solution for this?
    I know that magic number should disappear when using a comment but without comment I still cannot get MN.

    Thanks,
    Janek

     

    September 3, 2023 at 13:51 in reply to: Prop Firm Robots: General questions #195685
    User AvatarJanek
    Participant

    Hi Petko,

    Thank you  for creating the video and answering here :)

    August 31, 2023 at 22:24 in reply to: Prop Firm Robots: General questions #195152
    User AvatarJanek
    Participant

    Hi,

    Is the EURNZD still the best performer?

    Thanks,
    Janek

    August 31, 2023 at 0:13 in reply to: Prop Firm Robots: Errors and Solutions #194906
    User AvatarJanek
    Participant

    Done, this has resolved the issue. Thanks! Hopefully is nothing to do with amount of advisers from you I have been
    testing :)

    August 30, 2023 at 22:01 in reply to: Prop Firm Robots: Errors and Solutions #194888
    User AvatarJanek
    Participant

    I am getting this error: ModifyPosition: OrderCheck: Position specified has already been closed
    Is it anything that I should be worried about or it is not the error but a notification?

    August 30, 2023 at 21:57 in reply to: Prop Firm Robots: Errors and Solutions #194893
    User AvatarJanek
    Participant

    Could you go to Experts tab and see if you are getting any errors?

    August 30, 2023 at 21:38 in reply to: FTMO Robot: V4.3: What’s new? #194886
    User AvatarJanek
    Participant

    Alan, sorry for the late response. Didn’t see your reply to my question.
    I  am not  sure which  setting is wrong. I had 0.03 lot and nothing else changed.

    August 28, 2023 at 20:43 in reply to: FTMO Robot: V4.3: What’s new? #194304
    User AvatarJanek
    Participant

    This BT is for v4.1.

    I am wondering does it make any sense what I am doing here.
    I am using e.g.  AUDNZD  M1 FTMO Filter M30 v.4.1 and test then on all pairs I have in Market Watch.
    I am surprised that the best results I am getting on AUDUSD and results for AUDNZD  are negative.
    What do you guys thinking  about it?



    Thanks,
    Janek

    August 28, 2023 at 19:30 in reply to: Prop Firm Robots: Errors and Solutions #194250
    User AvatarJanek
    Participant

    I was getting the same error in MT5 on demo account and strategy tester:

    Press F4 (to get to MetaEditor), go to Search – find in files:


    Find what: return ((ENUM_ORDER_TYPE_FILLING)OrderGetInteger(ORDER_TYPE_FILLING));
    Replace with: return (ORDER_FILLING_IOC);
    Press Replace in Files

    Now compile all AE that you needed to change and restart MT5.
    I am not sure what does this change do I am not developer. But it fixed my issues.

    Thanks,
    Janek

  • Author
    Posts
Viewing 14 posts - 1 through 14 (of 14 total)
Account
Account
Shopping Cart