Forum Replies Created

Viewing 15 posts - 1 through 15 (of 21 total)
  • Author
    Posts
  • in reply to: Prop Firm Robots: Errors and Solutions #240127
    User Avatarfxbam
    Participant

    I wonder if this is true? This could explain why my EAs (5 charts) haven’t been trading over the last 2 weeks. I’m going to disable news on all of them and see if that makes a difference. I’ll let you know if I see an improvement over the next week.

    in reply to: Prop Firm Robots: Errors and Solutions #238634
    User Avatarfxbam
    Participant

    (Has anyone found any consistency from testing to actual trading)

    I’ve done testing and I’m currently running the FTMO Robot on 5 different charts.

    I’m 3 days in and not a single trade has been placed.

    • “Allow Options” have been checked.
    • “Algo Trading” is turned on.
    • Entry lots is below 1.0.
    • I’ve tried increasing the spread (points) but it was already good.
    • News filter is working.
    • Active protections showing on each chart are good.
    • Allow Algo Trading is checked for each EA.
    • I don’t see any errors.
    • All the other values are good too.

    I’ve done testing over an extended period of time and have an average of what to expect each week and month. I even rounded down to give a more realistic number. My concern is that with the 5 charts that are running I haven’t has one trade open yet.

    Something doesn’t feel right here.

    If no trades open up this week I’m expecting approximately 30 trades to open over the next 3 weeks. I know that will not realistically happen. This is why I’m mentioning something now.

    Has anyone else experienced this?

    I’m wonder is this EA is blocking trades on this account?

    It appears this week has been a complete waste. I’m curious to hear from anyone who has experienced this and was able to resolve it.

    Maybe there is something simple I’m overlooking?

    I’m not sure if there is anything else to consider.

    User Avatarfxbam
    Participant

    Thanks for sharing this video. I have seen this one before. I’ve decided to throw all my EAs on one MetaTrader and forward test them since the strategy tester wasn’t working very well. I have everything connected to myfxbook and FX Blue so I guess this will be the best way to test them.

    in reply to: Forex Strategy Builder Pro: Errors and Solutions #196847
    User Avatarfxbam
    Participant

    Is there a reason that an EA made in FSB Pro wouldn’t work in the strategy tester?

    The reason I say this is because I’ve noticed the strategy tester on MT4/5 is not working or performing poorly. I spent the last week carefully selecting the strategies I wanted and was planning to test them on the MT4/5 strategy testers before applying them to a chart to forward test them.

    MT5 is taking hours to perform a single test and the results are not even close.

    MT4 has taken my profitable strategies and has given me a result below zero or the EA doesn’t work at all.

    I didn’t expect the results to be the same but I thought they would at least be close. This last week has been a complete waste of time and from what I’m seeing FSB Pro doesn’t provide any benefit.

    When first using FSB Pro you feel like you finally found something that works but then reality sets in when you actually test it. The numbers were good and carefully selected. Everything looked great in the FSB Pro generator but that all changes once you export them.

    Same historical time, same inputs.

    I truly hope I can solve this issue.

    Has anyone experienced this problem before?

     

    in reply to: FTMO Robot: V4.3: What’s new? #193508
    User Avatarfxbam
    Participant

    I’ve tried adjust some of the settings before but it didn’t make a difference. I’ll try testing a slightly different deviation %. Thanks for the suggestion.

    I also wanted to mention that since your new update the strategy tester is now working with MT5.

    in reply to: FTMO Robot: V4.3: What’s new? #193009
    User Avatarfxbam
    Participant

    Hello Petko, thank you for the update. You also mentioned adjusting some of the metrics to help make your trades unique with the FTMO Robot from other traders. I’ve already done that.

    Please consider adding a delay option for execution too because FTMO has a maximum amount of trades on their platform that can open simultaneously. Example: Delay (None) – (adjustable 1 to 8-second delay)

    I’m not sure if this can be done but it could help prevent some issues that may come from excessive execution times. You’ll see that they have a maximum of 200 execution orders at the same time.

    Thanks again for all the work you put into everything you do. I honestly don’t know how you find the time.

    in reply to: FTMO Robot: V4.3: What’s new? #193011
    User Avatarfxbam
    Participant

    Has anyone noticed poor modeling quality when using the strategy tester? I’m already using the historical data from this website.

    Is there anything I can do to improve it or should I not worry at all?

    in reply to: FTMO Robot: V4.3: What’s new? #192179
    User Avatarfxbam
    Participant

    tstpierre, I’m noticing the same problem. I can use the strategy tester on MT4 but it doesn’t work on MT5. I get a similar message. The test will run but I will get 0 executions. I even tried speaking with a broker but they were unable to figure out why the EA wasn’t working.

    I’ve tried several MT5 brokers but none of them work. It would be nice to have this option because some companies only use MT5 and the MT5 strategy tester is faster.

    I hope he can figure this out.

    in reply to: Prop Firm Robots: Errors and Solutions #191566
    User Avatarfxbam
    Participant

    That’s great to hear, thank you.

    in reply to: FTMO Robot: V4.3: What’s new? #191505
    User Avatarfxbam
    Participant

    I think it’s working now.

    in reply to: FTMO Robot: V4.3: What’s new? #191486
    User Avatarfxbam
    Participant

    Has anyone else had any problem with making their backtesting work?

    When I test other EAs the backtesting seems to work but I’m having a problem getting it to work with the FTMO Robot.

    I checked historical data, and if the proper chart was selected, the correct date was chosen, did I have the correct inputs, and if I used crude control points for the test.

    There were no errors in the journal and the backtest showed 0 trades were taken.

    Has anyone else had this issue? 

    I would like to think it’s something simple but I can’t seem to figure it out.

    in reply to: FTMO Robot: V4.3: What’s new? #191255
    User Avatarfxbam
    Participant

    I think before anyone considers using it for Darwinex Petko Alexandrov needs to add an option for a delay before opening the trade. This will help make each trader slightly unique with their own trades.

    I’m sure I read somewhere with Darwinex that there is a percentage requirement for the trades of each individual trader. I also know the majority of prop firms out there have a threshold of how many positions can be opened at the exact same time on their server.

    I’ve posted a few messages in this forum asking Petko to consider adding this.

    I hope he might add this to it on his next EA update.

    in reply to: Prop Firm Robots: Errors and Solutions #191072
    User Avatarfxbam
    Participant

    Hello Petko, can you consider adding a delay to this EA so it can help with being slightly different from other traders?

    I’m running this on a few different accounts with different settings but they all opened their positions at the same time.

    An option to delay the open order from 1 to 10 seconds in the inputs would be helpful in reducing the risk of being flagged by a prop firm for opening a position at the same time as too many other people and will also help make our trades unique.

    in reply to: FTMO Robot: V4.3: What’s new? #190204
    User Avatarfxbam
    Participant

    Yes, I have it on 3 different accounts, and they all placed a trade today.

    in reply to: How to Pass FTMO Challenge #190082
    User Avatarfxbam
    Participant

    Can I ask what you are using?

Viewing 15 posts - 1 through 15 (of 21 total)
Shopping Cart